Carbon Tubing

1026 H.F.S.M.

ASTM A-519 / A106
  • Hot Finished Seamless Mechanical
Typical Analysis
C MN P S
0.21-
0.28		 0.60-
0.90		 0.040
Max		 0.050
Max
Typical Applications
  • Produced by rotary piercing, plug, or Assel mill rolling, and final processing through multiplepass size-reducing mills. Tolerances and finish are similar to other hot worked steel products. Range of sizes and grades is more restriced than cold finshed by nature of the process involved. This tubing is used where dimensional accuracy and surface finish are unimportant or secondary, or where desired tolerances, finish and final mechanical properties are to be attained by machining and heat treatment.
Mechanical Properties
    • Tensile - 60,000 psi
    • Yield - 35,000 psi
    • RB - 70
    • Elongation - 20 %
Typical Size Range
  • 1/2" O.D. to 26" O.D. - by .120" to 1.250" WALL
Tolerances
Wall Thickness Tolerances for Round Hot-Finished Tubing
Wall Thickness Range as Percent of Outside Diameter
Wall Thickness Tolerance, A percent Over and Under Nominal
Outside Diameter 2.999 in. (79.19 mm) and smaller Outside Diameter 3.000 in. (76.20 mm) to 5.999 in. (157.37 mm) Outside Diameter 6.000 in. (152.40 mm) to 10.750 in. (279.05 mm)
Under 15
12.5 10.0 10.0
15 and over
10.0 7.5 10.0

For more information about our Products and Services, please Contact Us or view our Product Manual.